QTP Training
Qualified Technical Person Course QLD
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand
exceeding 100 A per phase
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
QTP Training
Qualified Technical Person Course QLD
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand
exceeding 100 A per phase
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
QTP Training
Qualified Technical Person Course QLD
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand
exceeding 100 A per phase
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
Who will benefit from doing QTP Training?
If you are a Queensland Licensed Electrician requiring the skills and knowledge to become a Qualified Technical Person so you are able to operate as a business, this course is a requirement for you to obtain your Queensland Electrical Contractors licence.
Who will benefit from doing QTP Training?
If you are a Queensland Licensed Electrician requiring the skills and knowledge to become a Qualified Technical Person so you are able to operate as a business, this course is a requirement for you to obtain your Queensland Electrical Contractors licence.
Who will benefit from doing QTP Training?
If you are a Queensland Licensed Electrician requiring the skills and knowledge to become a Qualified Technical Person so you are able to operate as a business, this course is a requirement for you to obtain your Queensland Electrical Contractors licence.
QTP Training Overview
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
This unit involves the skills and knowledge required to apply currency of safe working practices and compliance verification of an electrical installation.
It includes preparing, following and applying safe work practices for a work area to verify compliance of an electrical installation.
The licensing regulator may require a holder of Unrestricted Electrician’s Licence or Qualified Electrical Contracting Licence to undertake this unit periodically to demonstrate currency in safe working, electrical rescue practices and compliance verification of electrical installations.
A person competent in this unit will hold an Unrestricted Electrical Licence issued in an Australian state or territory and be able to apply compliance requirements to all aspects of electrical work in accordance to relevant industry standards and regulations.
Competency in this unit can only be gained by persons who hold a current 'Unrestricted Electrician's Licence' issued in an Australian state or territory.
This unit is subject to the following requirements:
- legislation, regulations, relevant industry standards and codes of practice for electrical work, including specific work health and safety (WHS)/occupational health and safety (OHS) legislation and regulatory requirements
- electrical licensing requirements – Unrestricted Electrical Work
- legislation, regulations, relevant industry standards and codes of practice for renewable energy (RE).
QTP Training Overview
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
This unit involves the skills and knowledge required to apply currency of safe working practices and compliance verification of an electrical installation.
It includes preparing, following and applying safe work practices for a work area to verify compliance of an electrical installation.
The licensing regulator may require a holder of Unrestricted Electrician’s Licence or Qualified Electrical Contracting Licence to undertake this unit periodically to demonstrate currency in safe working, electrical rescue practices and compliance verification of electrical installations.
A person competent in this unit will hold an Unrestricted Electrical Licence issued in an Australian state or territory and be able to apply compliance requirements to all aspects of electrical work in accordance to relevant industry standards and regulations.
Competency in this unit can only be gained by persons who hold a current 'Unrestricted Electrician's Licence' issued in an Australian state or territory.
This unit is subject to the following requirements:
- legislation, regulations, relevant industry standards and codes of practice for electrical work, including specific work health and safety (WHS)/occupational health and safety (OHS) legislation and regulatory requirements
- electrical licensing requirements – Unrestricted Electrical Work
- legislation, regulations, relevant industry standards and codes of practice for renewable energy (RE).
QTP Training Overview
UEEEL0002 - Apply currency of safe working practices and compliance verification of electrical installations
This unit involves the skills and knowledge required to apply currency of safe working practices and compliance verification of an electrical installation.
It includes preparing, following and applying safe work practices for a work area to verify compliance of an electrical installation.
The licensing regulator may require a holder of Unrestricted Electrician’s Licence or Qualified Electrical Contracting Licence to undertake this unit periodically to demonstrate currency in safe working, electrical rescue practices and compliance verification of electrical installations.
A person competent in this unit will hold an Unrestricted Electrical Licence issued in an Australian state or territory and be able to apply compliance requirements to all aspects of electrical work in accordance to relevant industry standards and regulations.
Competency in this unit can only be gained by persons who hold a current 'Unrestricted Electrician's Licence' issued in an Australian state or territory.
This unit is subject to the following requirements:
- legislation, regulations, relevant industry standards and codes of practice for electrical work, including specific work health and safety (WHS)/occupational health and safety (OHS) legislation and regulatory requirements
- electrical licensing requirements – Unrestricted Electrical Work
- legislation, regulations, relevant industry standards and codes of practice for renewable energy (RE).
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase
This unit involves the skills and knowledge required to conduct compliance inspection of low voltage (LV) electrical installation with demand exceeding 100 ampere (A) per phase.
It includes preparing and conduction compliance inspection, and actioning and reporting on findings.
The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).
Competency development activities in this unit are subject to regulations directly related to licensing.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase
This unit involves the skills and knowledge required to conduct compliance inspection of low voltage (LV) electrical installation with demand exceeding 100 ampere (A) per phase.
It includes preparing and conduction compliance inspection, and actioning and reporting on findings.
The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).
Competency development activities in this unit are subject to regulations directly related to licensing.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
UEEEL0029 - Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase
This unit involves the skills and knowledge required to conduct compliance inspection of low voltage (LV) electrical installation with demand exceeding 100 ampere (A) per phase.
It includes preparing and conduction compliance inspection, and actioning and reporting on findings.
The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).
Competency development activities in this unit are subject to regulations directly related to licensing.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
This unit involves the skills and knowledge required to conduct compliance inspection of single phase low voltage (LV) electrical installation.
It includes preparing and conducting compliance inspections, and actioning and reporting on inspection findings.
The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating (a.c.) or 120 V direct current (d.c.)
Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
On successful completion of this course participants will be issued with a Statement of Attainment for nationally accredited modules.
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
This unit involves the skills and knowledge required to conduct compliance inspection of single phase low voltage (LV) electrical installation.
It includes preparing and conducting compliance inspections, and actioning and reporting on inspection findings.
The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating (a.c.) or 120 V direct current (d.c.)
Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
On successful completion of this course participants will be issued with a Statement of Attainment for nationally accredited modules.
UEEEL0030 - Conduct compliance inspection of single phase LV electrical installations
This unit involves the skills and knowledge required to conduct compliance inspection of single phase low voltage (LV) electrical installation.
It includes preparing and conducting compliance inspections, and actioning and reporting on inspection findings.
The skills and knowledge described in this unit require a license or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating (a.c.) or 120 V direct current (d.c.)
Competency development activities in this unit are subject to regulations directly related to licensing. Where a license or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
On successful completion of this course participants will be issued with a Statement of Attainment for nationally accredited modules.
Cairns QTP Training course details
Duration
3 Days for full course
Course Location
Safetylec Training Rooms
Suite 10 Woree Plaza
Business Centre
12-20 Toogood Rd, Woree QLD 4870
What to Bring
- USI Number (find yours here)
- Electronic or Hard Copy of AS/NZS 3000:2018 Electrical installations (Wiring Rules)
- Electronic or Hard Copy of AS/NZS (07) 4033 0976:2017 Electrical installations—Selection of cables
- Lunch
- Electrical Workers Licence
Dress Code
Smart casual or work wear with enclosed shoes
Cairns QTP Training course details
Duration
3 Days for full course
Course Location
Safetylec Training Rooms
Suite 10 Woree Plaza
Business Centre
12-20 Toogood Rd, Woree QLD 4870
What to Bring
- USI Number (find yours here)
- Electronic or Hard Copy of AS/NZS 3000:2018 Electrical installations (Wiring Rules)
- Electronic or Hard Copy of AS/NZS (07) 4033 0976:2017 Electrical installations—Selection of cables
- Lunch
- Electrical Workers Licence
Dress Code
Smart casual or work wear with enclosed shoes
Cairns QTP Training course details
Duration
3 Days for full course
Course Location
Safetylec Training Rooms
Suite 10 Woree Plaza
Business Centre
12-20 Toogood Rd, Woree QLD 4870
What to Bring
- USI Number (find yours here)
- Electronic or Hard Copy of AS/NZS 3000:2018 Electrical installations (Wiring Rules)
- Electronic or Hard Copy of AS/NZS (07) 4033 0976:2017 Electrical installations—Selection of cables
- Lunch
- Electrical Workers Licence
Dress Code
Smart casual or work wear with enclosed shoes
FAQs about QTP Training
Are there any prerequisites required for my QTP Training?
Yes. Those holding an Unrestricted Electrical Mechanics Licence or Electrical Fitter Mechanic Licence meet the pre-requisite requirements.
A person cannot become a QTP without a minimum of 2 years with a trade licence.
How do I register for my QTP Training?
You can register here for the upcoming course date of your choice.
Do you guarantee a pass for the course?
We take safety very seriously here at Safetylec and for that reason we will only pass students who we deem as competent so passing is not guaranteed however, we will give you all the information and support you need.
What payment options are available?
You can pay by cash, debit or credit card or bank transfer.
Do you offer private trainings?
Yes we do. If you are interested in running a private training for your team or a group of people, get in touch with us and we will happily provide you with a no-obligation quote